Rating
Votes
0
score
Downloads
0
total
Price
Free
API key required
Works With
About
Hand your AI a direct line into your Klipper-based printer's brain. Ask Claude 'why is my first layer uneven today' and it pulls live state from Moonraker — temperatures, bed mesh, recent errors, pressure advance, flow rates — and walks you through the fix in plain English.
Works with any Klipper printer: Voron 0/1/2.4/Trident, Ratrig, Prusa Mk4 in Klipper mode, klippered Ender 3/5, Sovol SV06/SV07, BIQU B1 SE Plus, or anything else you've klippered yourself. You'll need Moonraker exposed on your local network and an API key.
Read-mostly by design: it won't flash firmware, modify printer.cfg, or restart services without explicit permission. Pair it with Print Farm Captain for multi-printer setups, or with Filament Sage if you want a warm mentor persona instead of a diagnostic tool.
Don't lose this
Three weeks from now, you'll want Klipper AI Copilot again. Will you remember where to find it?
Save it to your library and the next time you need Klipper AI Copilot, it’s one tap away — from any AI app you use. Group it into a bench with the rest of the team for that kind of task and you can pull the whole stack at once.
⚡ Pro tip for geeks: add a-gnt 🤵🏻♂️ as a custom connector in Claude or a custom GPT in ChatGPT — one click and your library is right there in the chat. Or, if you’re in an editor, install the a-gnt MCP server and say “use my [bench name]” in Claude Code, Cursor, VS Code, or Windsurf.
a-gnt's Take
Our honest review
This plugs directly into your AI and gives it new abilities it didn't have before. Let Claude read your printer's live state and actually help. Once connected, just ask your AI to use it. It's verified by the creator and completely free. This one just landed in the catalog — worth trying while it's fresh.
Tips for getting started
Tap "Get" above, pick your AI app, and follow the steps. Most installs take under 30 seconds.
Heads up: this needs an API key to work. You'll get one from the service's website (usually free). The setup guide tells you exactly where.
What's New
Initial release
Ratings & Reviews
0.0
out of 5
0 ratings
No reviews yet. Be the first to share your experience.
From the Community
We Gave Four 3D Printers an AI Brain for a Week. Here's Everything We Learned.
A week of real workflows across a Voron 2.4, a Prusa Mk4, a Bambu X1C, and a heavily-modified klippered Ender 3 — with AI tools wired in to help. The moments the AI earned its place, the moment it was wrong, and what we would keep.
The 10-Minute Pre-Print Checklist (With an AI Second Set of Eyes)
Ten things to check before you hit print, plus the AI tools that now run the list with me — so I stop forgetting item seven at midnight.